The DSP Multilog Analyzer is a very useful and versatile hardware designed to meet the needs of vibration analysts and service providers and to monitor machine conditions.
The DSP Machinery Control software provides a complete, timely and portable solution for the resolution of problems in facilities.
The DSP Portable Analyzer is a system that helps detecting and preventing failures at an early stage. It also helps to correct imminent failures and provides warnings for maintenance to improve the machine performance.
It has 6 inputs for vibration sensors. 4 AC inputs that may be used for proximity detectors or for current clamps. 2 DC inputs for 4-20mA sensors or for temperature sensors. RPM, optical or magnetic sensor inlet.
Wi-Fi operation of the individual unit or as part of a network with multiple DSP Multilog devices (including different models of hardware). Simultaneous measurement of all channels (up to 20 kHz) Compact and portable. The alarm levels may be configured in scalar values or in the spectrum It has indicators that trigger the alarms and relay outputslets to command devices, such as emergency stops. The battery life lasts six hours It can transmit data or store it in non-volatile memory when communication breaks
General Description
The DSP Multilog is battery powered for six hours in continuous operation. The system may be run even in an existing LAN network together with other computers, printers, servers, etc. or through Internet. The hardware has an auto-diagnostic system that continuously tests sensors, wiring and the electronics to find any failure or interruption in the connectivity or energy outage
Dimensiones
Height: 125 mm (5 inches)
- Width: 350 mm (14 inches)
- Depth: 250 mm (10 inches)
- Weight: 5 kg (11 lb.)
- IP Classification: IP 50
- Temperature Range: 0 to +50 � C (32 to 122 � F)
- Humidity: 85% relative humidity, without condensation
- Power Supply:
- Battery charger included (100 – 250 V AC, 50/60 Hz, 30 W)
- Rechargeable internal battery, 6 hours working continuously
- 12 differential analog inputs (BNC connectors)
- 16-bit AD
- True simultaneous sampling of the 6 vibration channels
- Frequency range: from DC to 20 kHz
- Dynamic range: 120 dB
- Signal-to-noise ratio: 90 dB
- Amplitude accuracy: � 1%, phase of � 3 � (up to 100 Hz)
- Frequency range: 0.1 Hz to 20 kHz
- Frequency accuracy: 0.01%
- Storage of data in time, event or alarm condition
- Detection of sensor and cable failure
- Ethernet of 100 Mbit/s RJ45, TCP / IP
- Wi-Fi IEEE 802.11n, IEEE 802.11g,
- IEEE 802.11b 2.4-2.4835GHz, <20dBm
- Wireless security compatible with 64/128 bit
- WEP, WPA-PSK/WPA2-PSK
- 3G/3.75G connection, modem input included
- Service interface RS232
- Power switch
- CE Certification